The objects measured by the radar level meter are very complex. If you don't pay attention to them, it is easy to cause the influence and failure of the radar level meter. Therefore, to use radar level meter in daily life, it is necessary to master some troubleshooting methods for radar level meter. So, when the radar level meter fails, how to check it?
When we use the radar level instrument and find that the liquid level rises to a certain value, it will become very slow. At this time, it is necessary to check whether the power supply of the radar level meter is normal.
During the daily use of the radar level meter, check whether the power supply of the radar level meter is normally output after power-on. In addition, check whether the fuse of the radar level meter is malfunctioning in time, which will also affect the power supply of the radar level meter.
When the communication equipment of the radar level meter is found to be abnormal, we can install a radar debugging software to see if it can return to its normal state. When checking the communication equipment of the radar level meter, it is mainly to check whether the radar sensor of the radar level meter can accurately distinguish between reflected echo and false echo.
When the radar level meter is in normal use, the temperature is not higher than 50 degrees Celsius, because the radar level meter is mainly used to measure some high-temperature media. If the radar level meter is higher than 50 degrees Celsius, the radar level meter needs to be cooled.